BBPOS Chipper BT

From KB
Jump to: navigation, search

Specifications & Requirements

Chipper BT.png

Specifications:

Dimensions: 2.30" x 1.75" x 0.56"

Weight: 1.05 oz

Warranty: 3 months

Battery Life: 3 hours continuous use

SKU3: 080504012 Firmware Config Form Revision Number: 8 Firmware Version: 8.5.4 Config Version: 8

Product Specification sheet

Configuration Guides

Quicksale for Android

1. Pair the device to the Bluetooth of the phone/tablet.

  • Turn your device on. From the home screen of your phone/tablet, press your menu button.

Select Settings > Wireless & networks > Bluetooth Settings

  • Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range) The device will appear as CHB followed by the device's serial number.
  • You may see 2 identical CHBxxx please select the CHB with a single smartphone/old phone handle icon to the left of it and then press Pair.

2. Select the peripheral within QuickSale Payment App.

  • Log into the app. Select Configure > Setup > Peripheral Devices.
  • Tap on Swiper and select Bluetooth. Then choose the option CHB(device's serial number).

3. Configuring the WOOSIM R241 Printer.

  • From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

Video pairing guide

Quicksale for Apple iOS

  • Make sure Bluetooth is enabled on your iOS device

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

  • Log into the app. Select Configure > Setup > Peripheral Devices.
  • Click Swiper and select Chipper then Bluetooth.
  • Select the option CHB(device's serial number). The device is now connected.

3. Configuring the WOOSIM R241 Printer.

  • From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

Troubleshooting

To reset the BBPOS Chipper:

  • The reset button is located right next to the charging port, you can reach it through a tiny opening using a paper click or push pin, once you have inserted the push pin or paper click, pay attention to the light next to the power button, it will go red once you hit the reset button, when that happened hold it for 3 seconds and let it go, that will complete the reset, followed power off and power back on the reader.


Reconnecting Chipper EMV BT reader to the Quicksale mPOS

In the scenario that you turn on the reader and then login on the Quicksale mPOS, and a minute or 2 you do not see the work "Connected" for Android or "Bluetooth icon" for iOS at the bottom of the screen, tap 4 times as fast as you can on the blue start located in the middle of the icons of the home screen and that will reconnect any registered device, you can repeat the process as needed until icon popup.