Difference between revisions of "AZT W805"

From KB
Jump to: navigation, search
(Configuration)
(Configuration)
Line 56: Line 56:
  
 
[[file:AZT_NETW.PNG|50px|50px|thumb|left|480x280px]]
 
[[file:AZT_NETW.PNG|50px|50px|thumb|left|480x280px]]
 +
 +
  
  
Line 125: Line 127:
 
*The screen may reload after pressing the submit button.
 
*The screen may reload after pressing the submit button.
 
*The submit key just saves your current settings
 
*The submit key just saves your current settings
 +
 +
[[file:SIMPLEW.PNG|50px|50px|thumb|left|400x240px]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
'''App Configuration'''
 
'''App Configuration'''

Revision as of 16:01, 22 June 2020

Specifications & Requirements

AZT 805.png
  • Resolution: 203 dpi
  • Dimensions: 5.7" x 7.1 x 5.9 inches (W x D x H)
  • Weight: 3.2 lbs
  • Auto cutter: 500,000 cuts
  • Operating temperature range: 41~115 deg F
  • Driver support: Win 2000/XP/Vista/7
  • Interface: Serial, USB, WiFi, RJ-11, Ethernet
  • User language support
  • Paper width: 80 mm
  • Reliability: printer head life - 100 KM

Product information sheet

AZT W805

User manual

Media:805W_Manual_Revision_2.2.2.pdf

Configuration

Wired/LAN Setup


  • Power off the Printer and connect to an Ethernet cable.
  • Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address.
  • On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password
  • Click on the option Net on the top
  • Select Disable for DHCP and enter the IP address you wish to use below
  • Press Save All Data


WiFi Setup


You will need:

  • AN AZT-805W Thermal WiFi printer
  • A Computer or Tablet with WiFi capability.
  • Your Network’s WiFi SSID
  • Your network’s WiFi password
  • An unused IP address on your network
  • Your network’s encryption type


Connecting your device to the 805W WiFi

  • Plug in and turn on the 805W
  • Open the wireless network browser on your device
    • This is the browser you would use to connect to a WiFi network
  • Connect to the “Simple-WiFi” network in the WiFi network browser
    • (Windows 7 WiFi network browser shown) There is no password to join the network.
    • That can be changed later in advanced settings to prevent unwanted use of the printer.
AZT NETW.PNG













Connecting to the 805W internal web server

  • Open a web browser (Internet Explorer shown here)
  • Go to URL: 192.168.2.1
    • The default user name and password are listed below
    • USER NAME: admin
      • The user name is all lower case
    • PASSWORD: 1234567
WINDSEC.PNG












Attaching the 805W to your WiFi network

  • Click the “Wireless Settings” link at the left of the screen
  • SSID: 1. Type in the name of your WiFi SSID
    • 2. Your WiFI SSID may simply be something similar to” Linksys” or “Netgear”
    • 3. Remember, the SSID is Case Sensitive
  • NetWork Mode: Make sure this setting is INFRA (STA)
  • Encryption: Usually this will simply be WPA-PSK(TKIP). This can vary depending on how the WiFi network was set up at your location
  • Key Format: 1. Change From HEX to ASCII
    • 2. If you do not change this setting, you will get an error
    • 3. See section “Setting up the printer’s IP address –Problems / Solutions”
  • Encryption key: Change this to the password that was set up for your WiFi network
  • Press the SUBMIT button
  • The screen may reload after pressing the submit button.
  • The submit key just saves your current settings
SIMPLEW.PNG











App Configuration


  • Log into the Quicksale POS application.
  • Choose Options and then Choose Peripheral Devices
  • Choose Kitchen Printer and Choose Network
  • Enter the IP address you assigned for either the Wireless or LAN configuration