Difference between revisions of "AZT W805"

From KB
Jump to: navigation, search
(Configuration)
(Configuration)
 
Line 173: Line 173:
 
*If your Default gateway is 192.168.1.1, put 192.168.1.1 in this field Click update settings
 
*If your Default gateway is 192.168.1.1, put 192.168.1.1 in this field Click update settings
 
*You may get a screen that says “making this configuration page inaccessible…” or a similar message. Simply move to the Final Setup instructions
 
*You may get a screen that says “making this configuration page inaccessible…” or a similar message. Simply move to the Final Setup instructions
 +
[[file:Advancewif.PNG|50px|50px|thumb|left|450x250px]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
'''Final setup'''
 +
*Turn the printer off
 +
*Wait 5 seconds
 +
*Turn printer back on
 +
*Point a web browser that is a part of your network to the IP address you set for the printer
  
 
'''App Configuration'''
 
'''App Configuration'''

Latest revision as of 10:16, 23 June 2020

Specifications & Requirements

AZT 805.png
  • Resolution: 203 dpi
  • Dimensions: 5.7" x 7.1 x 5.9 inches (W x D x H)
  • Weight: 3.2 lbs
  • Auto cutter: 500,000 cuts
  • Operating temperature range: 41~115 deg F
  • Driver support: Win 2000/XP/Vista/7
  • Interface: Serial, USB, WiFi, RJ-11, Ethernet
  • User language support
  • Paper width: 80 mm
  • Reliability: printer head life - 100 KM

Product information sheet

AZT W805

User manual

Media:805W_Manual_Revision_2.2.2.pdf

Configuration

Wired/LAN Setup


  • Power off the Printer and connect to an Ethernet cable.
  • Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address.
  • On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password
  • Click on the option Net on the top
  • Select Disable for DHCP and enter the IP address you wish to use below
  • Press Save All Data


WiFi Setup


You will need:

  • AN AZT-805W Thermal WiFi printer
  • A Computer or Tablet with WiFi capability.
  • Your Network’s WiFi SSID
  • Your network’s WiFi password
  • An unused IP address on your network
  • Your network’s encryption type


Connecting your device to the 805W WiFi

  • Plug in and turn on the 805W
  • Open the wireless network browser on your device
    • This is the browser you would use to connect to a WiFi network
  • Connect to the “Simple-WiFi” network in the WiFi network browser
    • (Windows 7 WiFi network browser shown) There is no password to join the network.
    • That can be changed later in advanced settings to prevent unwanted use of the printer.
AZT NETW.PNG













Connecting to the 805W internal web server

  • Open a web browser (Internet Explorer shown here)
  • Go to URL: 192.168.2.1
    • The default user name and password are listed below
    • USER NAME: admin
      • The user name is all lower case
    • PASSWORD: 1234567
WINDSEC.PNG












Attaching the 805W to your WiFi network

  • Click the “Wireless Settings” link at the left of the screen
  • SSID: 1. Type in the name of your WiFi SSID
    • 2. Your WiFI SSID may simply be something similar to” Linksys” or “Netgear”
    • 3. Remember, the SSID is Case Sensitive
  • NetWork Mode: Make sure this setting is INFRA (STA)
  • Encryption: Usually this will simply be WPA-PSK(TKIP). This can vary depending on how the WiFi network was set up at your location
  • Key Format: 1. Change From HEX to ASCII
    • 2. If you do not change this setting, you will get an error
    • 3. See section “Setting up the printer’s IP address –Problems / Solutions”
  • Encryption key: Change this to the password that was set up for your WiFi network
  • Press the SUBMIT button
  • The screen may reload after pressing the submit button.
  • The submit key just saves your current settings
SIMPLEW.PNG











Setting up the printer’s IP address – Problems / Solutions

  • Parameter Error: One of the parameters entered on the previous page was either invalid or missing
    • o You will get this error if you have not changed the Key Format
  • Remember: Change Key Format From HEX to 'ASCII


Setting up the printer’s IP address

  • Click the “Advanced Settings” link at the left of the screen

Static IP Address:

  • Enter an unused IP address, example: 192.168.1.89, 192.168.1.112, 192.168.1.201
  • You will need to know this IP address when you set up your Point Of Sale application

Subnet Mask:

  • Enter the subnet mask of your network
  • For a 192.168.1.xxx type of network, the Subnet Mask will be 255.255.255.0

Default Gateway:

  • This is usually the IP of your router
  • On most networks that follow the IP address pattern of 192.168.1.xxx, this will be 192.168.1.1

DNS Server:

  • On most networks, this matches your Default Gateway
  • If your Default gateway is 192.168.1.1, put 192.168.1.1 in this field Click update settings
  • You may get a screen that says “making this configuration page inaccessible…” or a similar message. Simply move to the Final Setup instructions
Advancewif.PNG












Final setup

  • Turn the printer off
  • Wait 5 seconds
  • Turn printer back on
  • Point a web browser that is a part of your network to the IP address you set for the printer

App Configuration


  • Log into the Quicksale POS application.
  • Choose Options and then Choose Peripheral Devices
  • Choose Kitchen Printer and Choose Network
  • Enter the IP address you assigned for either the Wireless or LAN configuration