Verifying Quicksale Terminal Configuration

From KB
Revision as of 09:58, 9 June 2020 by Carias (Talk | contribs) (2. Check terminal firmware.)

Jump to: navigation, search

1. Check the TMS registration on terminal.

  • Go to Settings
  • Tap on about POS
  • Tap on POS Configuration
  • Tap on Administrator login
  • Contact your merchant service provider to obtain Administrator password
  • Tap on Remote management
  • Tap on Register WizarView, make sure URL is http//:wiztms.chargeanywhere.com:8380/wizarView
  • Tap on Ok, You should get “Registration Successful”
  • If you are unable to register the terminal and instead get an error message, please double check the URL entered, if it is correct then check the internet connection, disconnect the terminal from Wifi, after that reconnect to it and try again to register terminal.
  • If the terminal cannot be registered, our platform will not be able to push the app from TMS

2. Check terminal firmware.

  • Click on Settings
  • About POS
  • Under “Kernel version” check the latest firmware has the version, it should be dated “Wed Apr 1 11:48:00 CST 2020..”(Q2), "Mon Mar 2 18:31:21 CST 2020..”(Q1 Terminal) below that it will show “eng” if it is a Development unit, or “user” if it is a Production unit

3. Check the Terminal certificates.

  • Go to Settings
  • Tap on about POS
  • Tap on POS Configuration
  • Tap on Administrator login
  • Enter 8 times “9”
  • Tap on Certificate management
  • Tap on Certificate list
  • Terminals should have the following certificates
    • Alias:ca-owner-prod
    • Alias:app-sign-prod
    • Alias:Terminal_wizarposagent
    • Alias:wp_injectkey-pub
    • Alias:terminal_CAW
    • Alias:terminal_customagent
    • Alias:host-prod

4. Check the Terminal application version.

  • Go to Settings
  • Tap on about POS
  • Tap on POS Configuration
  • Tap on Administrator login
  • Enter 8 times “9”
  • Go back to main terminal screen and tap on Settings
  • On the right hand side upper corner tap on the 3 lines for all settings
  • Go to Apps
  • Tap on QuickSale
  • Terminal application version is shown right above Uninstall, current version is 2.1.15.2