View source for Anywhere Commerce Walker

{{Back to Peripherals}}
==Specifications & Requirements==
[[File:walker.png|thumb|upright|400x240px]]

<u>'''Specifications:'''</u>

Dimensions: 2.68" x 3.82" x 0.71"

Weight: 4.16 oz

Warranty: 1 year

Battery Life: 3 hours continuous use  

==Configuration Guides==

===<center>'''CHARGE Anywhere Mobile Payment App'''</center>===

====<u>Android</u>====

1. Pair the device to the Bluetooth of the phone/tablet.

*Turn your device on. From the home screen of your phone/tablet, press your menu button.
Select Settings > Wireless & networks > Bluetooth Settings
*On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
*Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range)
*Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

'''2. Select the peripheral within CHARGE Anywhere Mobile Payment App.'''
*Log into the app. Select Configure > Setup > Peripheral Devices.
*Click Swiper and select Bluetooth. Then choose CA MPOS.

'''3. Configuring the WOOSIM R241 Printer.'''
*From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

====<u>Apple iOS</u>====
*Turn your device on. From the home screen of your phone/tablet, press the icon for setup.
Choose Bluetooth from the left side menu.
*On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
*Make sure Bluetooth is turned on and wait a few seconds for your phone/tablet to detect all Bluetooth devices within range
*Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

'''2. Select the peripheral within CHARGE Anywhere Mobile Payment App.'''
*Log into the app. Select Configure > Setup > Peripheral Devices.
*Click Swiper and select CA MPOS.
*The application will run through some tests and then the Miura will restart. The device is now connected.

'''3. Configuring the WOOSIM R241 Printer.'''
*From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

====<u>Windows PC</u>====
*Turn your device on.
*Connect the device to your PC using the supplied USB Cable.
*Open your My Computer icon and you should see the Miura listed. Double click on the Miura icon.
[http://kb.chargeanywhere.com/img_auth.php/4/48/Miura_USB_Configuration_File.zip '''Miura USB Configuration File'''] - Download the following Configuration File and Save onto your desktop
*Open the Miura_USB_Configuration_File.zip and drag the file into the Miura window.
*Unplug the Mirua from the PC and it will install the drivers.
*Plug the Miura back into your PC and once the install completes the Miura is ready to be used

=='''Demos & FAQ'''==

[http://kb.chargeanywhere.com/img_auth.php/d/df/Pairing_Muira_to_Cell_phone_V2.mp4 '''Miura Pairing Guide'''] - Click link to download a video guide to pairing the Miura Bluetooth EMV reader

=='''Troubleshooting'''==

'''The Bluetooth Icon will not start flashing after holding down the Green Check button'''
*First make sure the device has not already been paired to another phone or tablet. If it is try unpairing the Miura from that device.
*Press the reset button on the Miura device. The reset button can be found in the small pin hole on the left side. You may need a push pin or paperclip to press the button.
*Allow the Miura to reset and when it returns to the Charge Anywhere screen hold down the Green Check button again


'''Connect Unsuccessful in the Charge Anywhere App'''
*Exit the Charge Anywhere application and go back into your Bluetooth settings. Toggle Bluetooth on and off and try connecting the Miura again in the Charge Anywhere application
*Power off the phone or tablet and reset the Miura by pressing the small pin hole on the left side. Once both devices restart try connecting the Miura again in the Charge Anywhere application

{{Back to Peripherals}}