LinkPoint BankPoint II

Back to Peripherals

Specifications & Requirements

Specifications:

Display: 16 x 2 Character LCD without backlight

Keypad: 0-9 Numeric keys; 3 Function/Screen addressable keys; 3 keys of "Cancel", "Clear", "Enter"

Memory: 32 Kbytes battery backup. Code Update

Communications: RS232 interface: Standard RS232, up to 19200 bps, 7 data bits, 1 stop bit, even parity; (Default

Factory Baud Rate Setting: 1200).

Security: DES/Triple DES/MACing; Secure Key Management: DUKPT/Master Session

Physical: 155.7 mm(L) x 81.9 mm(W) x 42.3 mm(H)

Environmental Operating Temperature: 0 to 50 degree C

Operating Humidity: 5% to 95% RH non-condensing

Voltage: 7.5V to 10V@100mA

Requirements:

Serial Connection

Windows Drivers

Compatible card reader configured with software

Configuration Guides

CHARGE Anywhere Designed for Use with QuickBooks

1. Ensure that the Windows drivers are installed. See Installing Drivers section below.

2. Log into the QuickBooks company file as the admin user and go to Company > CHARGE Anywhere > Setup > Print Options. Click Peripheral Devices.

3. Use the dropdown menu under Card Swiper Configuration and Pinpad Configuration to select your device. Select the assigned Com Port.

4. Click Save on the Peripheral Device Configuration screen and click OK in the setup menu.

CHARGE Anywhere for Windows

1. Ensure that the Windows drivers have been installed. See Installing Drivers below.

2. Sign in and right click the CHARGE Anywhere icon in the notification section of your desktop. Select Setup.

3. Click on the Print Options tab and click Peripheral Devices. A Peripheral Device Configuration screen will appear.

4. Use the drop menu under Card Swiper Configuration and Pinpad Configuration to select your device. Select the assigned Com Port.

5. Click Save on the Peripheral Device Configuration screen and click OK in the setup menu.

Installing Drivers

Back to Peripherals