Difference between revisions of "Unimag Reader Doesn't Connect"
| (12 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
This message will appear if the Unimag Audio Jack Reader is not compatible with your Android device or if there is a problem making a connection. | This message will appear if the Unimag Audio Jack Reader is not compatible with your Android device or if there is a problem making a connection. | ||
| − | First you will need to make sure the Android device you are using is on the manufacturers ''' [http:// | + | |
| + | First you will need to make sure the Android device you are using is on the manufacturers ''' [http://kb.chargeanywhere.com/img_auth.php/8/82/Shuttle_Compatibility_List.pdf Unimag Compatibility List]''' When looking up your device please choose the Unimag II option from the tabs | ||
The model needs to be listed and it must be running a firmware at or '''below''' what is listed on the site. If you are running Android firmware higher than what is listed the device may not be able to work | The model needs to be listed and it must be running a firmware at or '''below''' what is listed on the site. If you are running Android firmware higher than what is listed the device may not be able to work | ||
| − | If your device meets the requirements on the | + | |
| + | If your device meets the requirements on the compatibility list you can use the following steps to troubleshoot the connection | ||
| + | |||
| + | |||
| + | <gallery widths=150px heights=200px perrow=5> | ||
| + | File:Unimag Search.png| '''1.''' In your app store search for Unimag | ||
| + | File:Unimag Install.png| '''2.''' Download and Install the ID Tech UniMag Demo | ||
| + | File:Unimag Select.png| '''3.''' Connect the reader and launch the application. When the screen comes up to select a reader choose Unimag II | ||
| + | File:Unimag_Swipe.png| '''4.''' Press the Swipe Card button and swipe a card through the reader''' | ||
| + | File:Unimag_Trackdata.png| '''5.''' If the card is read successfully the card information will be printed on the screen | ||
| + | </gallery> | ||
| + | |||
| + | |||
| + | If you are able to get a successful swipe in this app then the reader is communicating properly. Go back into your Quicksale application and navigate to Config > Setup > Peripheral Devices and add the swiper again | ||
| + | |||
| + | [[File:Swiper Connected.png|thumb|right|200px|Audio Jack Reader connected]] | ||
Latest revision as of 13:30, 26 June 2018
This message will appear if the Unimag Audio Jack Reader is not compatible with your Android device or if there is a problem making a connection.
First you will need to make sure the Android device you are using is on the manufacturers Unimag Compatibility List When looking up your device please choose the Unimag II option from the tabs
The model needs to be listed and it must be running a firmware at or below what is listed on the site. If you are running Android firmware higher than what is listed the device may not be able to work
If your device meets the requirements on the compatibility list you can use the following steps to troubleshoot the connection
1. In your app store search for Unimag
2. Download and Install the ID Tech UniMag Demo
3. Connect the reader and launch the application. When the screen comes up to select a reader choose Unimag II
4. Press the Swipe Card button and swipe a card through the reader
5. If the card is read successfully the card information will be printed on the screen
If you are able to get a successful swipe in this app then the reader is communicating properly. Go back into your Quicksale application and navigate to Config > Setup > Peripheral Devices and add the swiper again
