AZT W805

Back to Peripherals

Specifications & Requirements

• Resolution: 203 dpi
• Dimensions: 5.7" x 7.1 x 5.9 inches (W x D x H)
• Weight: 3.2 lbs
• Auto cutter: 500,000 cuts
• Operating temperature range: 41~115 deg F
• Driver support: Win 2000/XP/Vista/7
• Interface: Serial, USB, WiFi, RJ-11, Ethernet
• User language support
• Paper width: 80 mm
• Reliability: printer head life - 100 KM

Product information sheet

AZT W805

User manual

Media:805W_Manual_Revision_2.2.2.pdf

Configuration

Wired/LAN Setup

---

• Power off the Printer and connect to an Ethernet cable.
• Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address.
• On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password
• Click on the option Net on the top
• Select Disable for DHCP and enter the IP address you wish to use below
• Press Save All Data

WiFi Setup

---

You will need:

• AN AZT-805W Thermal WiFi printer
• A Computer or Tablet with WiFi capability.
• Your Network’s WiFi SSID
• Your network’s WiFi password
• An unused IP address on your network
• Your network’s encryption type

Connecting your device to the 805W WiFi

• Plug in and turn on the 805W
• Open the wireless network browser on your device
  • This is the browser you would use to connect to a WiFi network
• Connect to the “Simple-WiFi” network in the WiFi network browser
  • (Windows 7 WiFi network browser shown) There is no password to join the network.
  • That can be changed later in advanced settings to prevent unwanted use of the printer.

Connecting to the 805W internal web server

• Open a web browser (Internet Explorer shown here)
• Go to URL: 192.168.2.1
  • The default user name and password are listed below
  • USER NAME: admin
    • The user name is all lower case
  • PASSWORD: 1234567

Attaching the 805W to your WiFi network

• Click the “Wireless Settings” link at the left of the screen
• SSID: 1. Type in the name of your WiFi SSID
  • 2. Your WiFI SSID may simply be something similar to” Linksys” or “Netgear”
  • 3. Remember, the SSID is Case Sensitive
• NetWork Mode: Make sure this setting is INFRA (STA)
• Encryption: Usually this will simply be WPA-PSK(TKIP). This can vary depending on how the WiFi network was set up at your location
• Key Format: 1. Change From HEX to ASCII
  • 2. If you do not change this setting, you will get an error
  • 3. See section “Setting up the printer’s IP address –Problems / Solutions”
• Encryption key: Change this to the password that was set up for your WiFi network
• Press the SUBMIT button
• The screen may reload after pressing the submit button.
• The submit key just saves your current settings

Setting up the printer’s IP address – Problems / Solutions

• Parameter Error: One of the parameters entered on the previous page was either invalid or missing
  • o You will get this error if you have not changed the Key Format
• Remember: Change Key Format From HEX to 'ASCII

Setting up the printer’s IP address

• Click the “Advanced Settings” link at the left of the screen

Static IP Address:

• Enter an unused IP address, example: 192.168.1.89, 192.168.1.112, 192.168.1.201
• You will need to know this IP address when you set up your Point Of Sale application
  • To find out the usable IP addresses range go to the Windows search bar and type "cmd" the start the command prompt app
  • Once the command prompt populates type in "arp -a" and use first IP to identify range "192.168.1.89" in this example you could use "192.168.1.200"

Subnet Mask:

• Enter the subnet mask of your network
• For a 192.168.1.xxx type of network, the Subnet Mask will be 255.255.255.0

Default Gateway:

• This is usually the IP of your router
• On most networks that follow the IP address pattern of 192.168.1.xxx, this will be 192.168.1.1

DNS Server:

• On most networks, this matches your Default Gateway
• If your Default gateway is 192.168.1.1, put 192.168.1.1 in this field Click update settings
• You may get a screen that says “making this configuration page inaccessible…” or a similar message. Simply move to the Final Setup instructions
  • You can find the all this values by going to the Windows search bar and type "cmd" then start the command prompt application
  • Once the command prompt populates type in "ipconfig /all" then looks for those values, they should be listed towards the bottom

Final setup

• Turn the printer off
• Wait 5 seconds
• Turn printer back on
• Point a web browser that is a part of your network to the IP address you set for the printer

App Configuration

---

• Log into the Quicksale POS application.
• Choose Options and then Choose Peripheral Devices
• Choose Kitchen Printer and Choose Network
• Enter the IP address you assigned for either the Wireless or LAN configuration