Difference between revisions of "Star TSP654"
From KB
(Created page with "{{Back to Peripherals}} ==Specifications & Requirements== 50px|thumb|upright|400x240px <u>'''Specifications:'''</u>") |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Back to Peripherals}} | {{Back to Peripherals}} | ||
| − | ==Specifications & Requirements== | + | =='''Specifications & Requirements'''== |
| − | [[File:StarTSP.jpg|50px|thumb|upright|400x240px]] | + | [[File:StarTSP.jpg|50px|50px|thumb|upright|400x240px]] |
| − | < | + | *Print Method Direct Thermal |
| + | *Print Resolution 203 dpi | ||
| + | *Print Speed Up to 300mm/second | ||
| + | *Paper Width 80mm standard / 58mm (paper guide) | ||
| + | *Paper Thickness 0.053 – 0.085mm | ||
| + | *Paper Roll Diameter 83mm | ||
| + | *Power Consumption Operating / Waiting - Average 1.9 / 0.15A | ||
| + | *Uses PS60 - 24V PSU with Hosiden connector | ||
| + | *Dimensions 142 (W) x 132 (H) x 202 (D) mm | ||
| + | *Weight 1.72kg | ||
| + | *Near End Sensor Horizontal and vertical use | ||
| + | *2D Barcode Support QR Code, PDF417, GS1 | ||
| + | |||
| + | ==<b>'''Product information sheet'''</b> == | ||
| + | |||
| + | [https://www.chargeanywhere.com/remotefiles/Others/TSP650.pdf <b>'''Star TSP654'''</b>] | ||
| + | |||
| + | ==<b>'''User manual'''</b>== | ||
| + | |||
| + | [[Media:Tsp654.pdf]] | ||
| + | |||
| + | =='''Configuration'''== | ||
| + | |||
| + | '''Wired/LAN Setup''' | ||
| + | ---- | ||
| + | *Power off the Printer and connect to an Ethernet cable. | ||
| + | *Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address. | ||
| + | *On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password | ||
| + | *Click on the option Net on the top | ||
| + | *Select Disable for DHCP and enter the IP address you wish to use below | ||
| + | *Press Save All Data | ||
| + | |||
| + | |||
| + | '''App Configuration''' | ||
| + | ---- | ||
| + | *Log into the Quicksale POS application. | ||
| + | *Choose Options and then Choose Peripheral Devices | ||
| + | *Choose Kitchen Printer and Choose Network | ||
| + | *Enter the IP address you assigned for either the Wireless or LAN configuration | ||
Latest revision as of 15:28, 26 March 2019
Specifications & Requirements
- Print Method Direct Thermal
- Print Resolution 203 dpi
- Print Speed Up to 300mm/second
- Paper Width 80mm standard / 58mm (paper guide)
- Paper Thickness 0.053 – 0.085mm
- Paper Roll Diameter 83mm
- Power Consumption Operating / Waiting - Average 1.9 / 0.15A
- Uses PS60 - 24V PSU with Hosiden connector
- Dimensions 142 (W) x 132 (H) x 202 (D) mm
- Weight 1.72kg
- Near End Sensor Horizontal and vertical use
- 2D Barcode Support QR Code, PDF417, GS1
Product information sheet
User manual
Configuration
Wired/LAN Setup
- Power off the Printer and connect to an Ethernet cable.
- Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address.
- On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password
- Click on the option Net on the top
- Select Disable for DHCP and enter the IP address you wish to use below
- Press Save All Data
App Configuration
- Log into the Quicksale POS application.
- Choose Options and then Choose Peripheral Devices
- Choose Kitchen Printer and Choose Network
- Enter the IP address you assigned for either the Wireless or LAN configuration
