Difference between revisions of "E-SIM activation"
From KB
| Line 1: | Line 1: | ||
Please follow the steps below to enable e-sim: | Please follow the steps below to enable e-sim: | ||
| − | * Connect device to WiFi | + | * From main screen tap on Setting |
| + | * Tap on WLAN | ||
| + | * Connect device to WiFi by selecting the network and entering the network password | ||
| + | * Ta on the circle button located on the bottom center to return to home screen | ||
* Go to Settings | * Go to Settings | ||
| − | * | + | * Tap on About POS located on bottom right corner |
* Tap on POS Configuration | * Tap on POS Configuration | ||
* Tap on Administrator login | * Tap on Administrator login | ||
Latest revision as of 08:14, 22 November 2021
Please follow the steps below to enable e-sim:
- From main screen tap on Setting
- Tap on WLAN
- Connect device to WiFi by selecting the network and entering the network password
- Ta on the circle button located on the bottom center to return to home screen
- Go to Settings
- Tap on About POS located on bottom right corner
- Tap on POS Configuration
- Tap on Administrator login
- Enter password 99999999
- Tap on Soft SIM Settings
- Toggle E-SIM on
- If you receive an error toggle Soft SIM settings off and on then, leave device connected to WiFi for at least for 30 minutes or until you get a popup "Turn off Wifi to use wireless", if you see an error under "Activate softSIM" displaying "Reboot terminal" proceed to reboot the terminal and leave connected to WiFi until you get a popup "Turn off Wifi to use wireless".
Once terminal wireless is active the wireless icon on top right corner should display signal bars and also the type of signal that terminal is receiving (3G,4G, LTE). At that point wireless setup will be completed.
Note: E-SIM activation must be requested first to Charge Anywhere with at least 48 hrs before it can be enabled on QuickSale terminal.
