Difference between revisions of "Verifying Quicksale Terminal Configuration"
From KB
(Created page with "'''1. Check the TMS registration on terminal.''' * Go to Settings * Tap on about POS * Tap on POS Configuration * Tap on Administrator login * Enter 8 times “9” * Tap on...") |
|||
| Line 1: | Line 1: | ||
'''1. Check the TMS registration on terminal.''' | '''1. Check the TMS registration on terminal.''' | ||
| − | * Go to Settings | + | * Go to '''Settings''' |
| − | * Tap on about POS | + | * Tap on '''about POS''' |
| − | * Tap on POS Configuration | + | * Tap on '''POS Configuration''' |
| − | * Tap on Administrator login | + | * Tap on '''Administrator login''' |
| − | * Enter 8 times “9” | + | * Enter 8 times '''“9”''' |
| − | * Tap on Remote management | + | * Tap on '''Remote management''' |
| − | * Tap on Register WizarView | + | * Tap on Register WizarView, make sure URL is '''http//:wiztms.chargeanywhere.com:8380/wizarView''' |
| − | * Tap on Ok, You should get “Registration Successful” | + | * Tap on '''Ok''', You should get '''“Registration Successful”''' |
* If you are unable to register the terminal and instead get an error message, please triple check the URL entered, if it is correct check the internet connection, disconnect from Wifi and reconnect to it and try again to register terminal. | * If you are unable to register the terminal and instead get an error message, please triple check the URL entered, if it is correct check the internet connection, disconnect from Wifi and reconnect to it and try again to register terminal. | ||
*If the terminal cannot be registered, we will not be able to push the app from TMS | *If the terminal cannot be registered, we will not be able to push the app from TMS | ||
| Line 14: | Line 14: | ||
'''2. Check terminal firmware.''' | '''2. Check terminal firmware.''' | ||
| − | * Click on Settings | + | * Click on '''Settings''' |
| − | * About POS | + | * About '''POS''' |
| − | * Under “Kernel version” check the latest firmware has the version “3.10.49-wp1.0.0.. Tue Dec 25..”, it will show “eng” if it is a Development unit, or “user” if it is a Production unit | + | * Under '''“Kernel version”''' check the latest firmware has the version '''“3.10.49-wp1.0.0.. Tue Dec 25..”''', it will show '''“eng”''' if it is a Development unit, or '''“user”''' if it is a Production unit |
'''3. Check the Terminal certificates.''' | '''3. Check the Terminal certificates.''' | ||
| − | * Go to Settings | + | * Go to '''Settings''' |
| − | * Tap on about POS | + | * Tap on '''about POS''' |
| − | * Tap on POS Configuration | + | * Tap on '''POS Configuration''' |
| − | * Tap on Administrator login | + | * Tap on '''Administrator login''' |
| − | * Enter 8 times “9” | + | * Enter 8 times '''“9”''' |
| − | * Tap on Certificate management | + | * Tap on '''Certificate management''' |
| − | * Tap on Certificate list | + | * Tap on '''Certificate list''' |
* Terminals should have the following certificates | * Terminals should have the following certificates | ||
| + | ** Alias:ca-owner-prod | ||
| + | ** Alias:app-sign-prod | ||
| + | ** Alias:Terminal_wizarposagent | ||
| + | ** Alias:wp_injectkey-pub | ||
| + | ** Alias:terminal_CAW | ||
| + | ** Alias:terminal_customagent | ||
| + | ** Alias:host-prod | ||
Revision as of 07:00, 26 March 2019
1. Check the TMS registration on terminal.
- Go to Settings
- Tap on about POS
- Tap on POS Configuration
- Tap on Administrator login
- Enter 8 times “9”
- Tap on Remote management
- Tap on Register WizarView, make sure URL is http//:wiztms.chargeanywhere.com:8380/wizarView
- Tap on Ok, You should get “Registration Successful”
- If you are unable to register the terminal and instead get an error message, please triple check the URL entered, if it is correct check the internet connection, disconnect from Wifi and reconnect to it and try again to register terminal.
- If the terminal cannot be registered, we will not be able to push the app from TMS
2. Check terminal firmware.
- Click on Settings
- About POS
- Under “Kernel version” check the latest firmware has the version “3.10.49-wp1.0.0.. Tue Dec 25..”, it will show “eng” if it is a Development unit, or “user” if it is a Production unit
3. Check the Terminal certificates.
- Go to Settings
- Tap on about POS
- Tap on POS Configuration
- Tap on Administrator login
- Enter 8 times “9”
- Tap on Certificate management
- Tap on Certificate list
- Terminals should have the following certificates
- Alias:ca-owner-prod
- Alias:app-sign-prod
- Alias:Terminal_wizarposagent
- Alias:wp_injectkey-pub
- Alias:terminal_CAW
- Alias:terminal_customagent
- Alias:host-prod
