Difference between revisions of "Verifying Quicksale Terminal Configuration"
From KB
(→4. Check the Terminal application version.) |
(→1. Check the TMS registration on terminal.) |
||
| Line 12: | Line 12: | ||
* Tap on '''Ok''', You should get '''“Registration Successful”''' | * Tap on '''Ok''', You should get '''“Registration Successful”''' | ||
* If you are unable to register the terminal and instead get an error message, please double check the URL entered, if it is correct then check the internet connection, disconnect the terminal from Wifi, after that reconnect to it and try again to register terminal. | * If you are unable to register the terminal and instead get an error message, please double check the URL entered, if it is correct then check the internet connection, disconnect the terminal from Wifi, after that reconnect to it and try again to register terminal. | ||
| − | *If the terminal cannot be registered, | + | *If the terminal cannot be registered, our platform will not be able to push the app from TMS |
| − | |||
| − | |||
| − | |||
=='''2. Check terminal firmware.'''== | =='''2. Check terminal firmware.'''== | ||
Revision as of 10:01, 1 July 2019
Contents
1. Check the TMS registration on terminal.
- Go to Settings
- Tap on about POS
- Tap on POS Configuration
- Tap on Administrator login
- Enter 8 times “9”
- Tap on Remote management
- Tap on Register WizarView, make sure URL is http//:wiztms.chargeanywhere.com:8380/wizarView
- Tap on Ok, You should get “Registration Successful”
- If you are unable to register the terminal and instead get an error message, please double check the URL entered, if it is correct then check the internet connection, disconnect the terminal from Wifi, after that reconnect to it and try again to register terminal.
- If the terminal cannot be registered, our platform will not be able to push the app from TMS
2. Check terminal firmware.
- Click on Settings
- About POS
- Under “Kernel version” check the latest firmware has the version “3.10.49-wp1.0.0.. Sun Apr 28..”, it will show “eng” if it is a Development unit, or “user” if it is a Production unit
3. Check the Terminal certificates.
- Go to Settings
- Tap on about POS
- Tap on POS Configuration
- Tap on Administrator login
- Enter 8 times “9”
- Tap on Certificate management
- Tap on Certificate list
- Terminals should have the following certificates
- Alias:ca-owner-prod
- Alias:app-sign-prod
- Alias:Terminal_wizarposagent
- Alias:wp_injectkey-pub
- Alias:terminal_CAW
- Alias:terminal_customagent
- Alias:host-prod
4. Check the Terminal application version.
- Go to Settings
- Tap on about POS
- Tap on POS Configuration
- Tap on Administrator login
- Enter 8 times “9”
- Go back to main terminal screen and tap on Settings
- On the right hand side upper corner tap on the 3 lines for all settings
- Go to Apps
- Tap on QuickSale
- Terminal application version is shown right above Uninstall, current version is 2.1.10.7
