Difference between revisions of "E-SIM activation"

Revision as of 11:09, 16 June 2020

Please follow the steps below to enable e-sim:

Connect device to WiFi
Tap on Settings
Scroll down and Tap on About POS
Tap on POS Configuration
Tap on Administrator login
Tap on Soft SIM Settings
Toggle E-SIM on
Leave device connected to WiFi for 30 minutes then, reboot terminal once device is back up turn off WiFi, wireless icon should display signal bars and wireless setup will be completed

Note: E-SIM activation must be requested first to Charge Anywhere before it can be enabled on QuickSale terminal

Revision as of 11:09, 16 June 2020 (view source) Carias (talk \| contribs) ← Older edit		Revision as of 11:09, 16 June 2020 (view source) Carias (talk \| contribs) Newer edit →
Line 1:		Line 1:
	Please follow the steps below to enable e-sim:		Please follow the steps below to enable e-sim:
		+

	*Connect device to WiFi		*Connect device to WiFi