Difference between revisions of "E-SIM activation"

Revision as of 07:19, 23 July 2021

Please follow the steps below to enable e-sim:

Connect device to WiFi
Go to Settings
Scroll down and Tap on About POS
Tap on POS Configuration
Tap on Administrator login
Enter password 99999999
Tap on Soft SIM Settings
Toggle E-SIM on
- If you receive an error toggle Soft SIM settings off and on then, leave device connected to WiFi for at least for 30 minutes or until you get a popup "Turn off Wifi to use wireless" or until "Activate softSIM" displays "Reboot terminal".

Once terminal wireless is active the wireless icon on top right corner should display signal bars and also the type of signal that terminal is receiving (2G,3G,4G, LTE). At that point wireless setup will be completed.

Note: E-SIM activation must be requested first to Charge Anywhere before it can be enabled on QuickSale terminal

Revision as of 07:17, 23 July 2021 (view source) Carias (talk \| contribs) ← Older edit		Revision as of 07:19, 23 July 2021 (view source) Carias (talk \| contribs) Newer edit →
Line 12:		Line 12:

	Once terminal wireless is active the wireless icon on top right corner should display signal bars and also the type of signal that terminal is receiving (2G,3G,4G, LTE). At that point wireless setup will be completed.		Once terminal wireless is active the wireless icon on top right corner should display signal bars and also the type of signal that terminal is receiving (2G,3G,4G, LTE). At that point wireless setup will be completed.
		+
		+	'''Note:''' E-SIM activation must be requested first to Charge Anywhere before it can be enabled on QuickSale terminal