BBPOS Chipper BT
From KB
Contents
Specifications & Requirements
Specifications:
Dimensions: 2.30" x 1.75" x 0.56"
Weight: 1.05 oz
Warranty: 3 months
Battery Life: 3 hours continuous use
SKU3: 080504012 Firmware Config Form Revision Number: 8 Firmware Version: 8.5.4 Config Version: 8
Configuration Guides
Quicksale for Android
1. Pair the device to the Bluetooth of the phone/tablet.
- Turn your device on. From the home screen of your phone/tablet, press your menu button.
Select Settings > Wireless & networks > Bluetooth Settings
- Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range) The device will appear as CHB followed by the device's serial number
- Once devices are found, select the Chipper BT Reader and press Pair on the phone
2. Select the peripheral within QuickSale Payment App.
- Log into the app. Select Configure > Setup > Peripheral Devices.
- Click Swiper and select Bluetooth. Then choose the option CHB(device's serial number).
3. Configuring the WOOSIM R241 Printer.
- From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.
Quicksale for Apple iOS
- Make sure Bluetooth is enabled on your iOS device
2. Select the peripheral within CHARGE Anywhere Mobile Payment App.
- Log into the app. Select Configure > Setup > Peripheral Devices.
- Click Swiper and select Chipper then Bluetooth.
- Select the option CHB(device's serial number). The device is now connected.
3. Configuring the WOOSIM R241 Printer.
- From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.
Troubleshooting
To reset the BBPOS Chipper:
- The reset button is located right next to the power button, you can reach it through a tiny opening using a paper click or push pin, once you have inserted the push pin or paper click hold on for 3 seconds and let it go, that will complete the reader system restore.
