E-SIM activation

From KB
Revision as of 11:08, 16 June 2020 by Carias (talk | contribs) (Created page with "Please follow the steps below to enable e-sim: *Connect device to WiFi *Tap on Settings *Scroll down and Tap on About POS *Tap on POS Configuration *Tap on Administrator logi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Please follow the steps below to enable e-sim:

  • Connect device to WiFi
  • Tap on Settings
  • Scroll down and Tap on About POS
  • Tap on POS Configuration
  • Tap on Administrator login
  • Tap on Soft SIM Settings
  • Toggle E-SIM on
  • Leave device connected to WiFi for 30 minutes then, reboot terminal once device is back up turn off WiFi, wireless icon should display signal bars and wireless setup will be completed

Note: E-SIM activation must be requested first to Charge Anywhere before it can be enabled on QuickSale terminal

Retrieved from "https://kb.chargeanywhere.com/index.php?title=E-SIM_activation&oldid=6115"