AZT W805

Specifications & Requirements

Wired/LAN Setup

Power off the Printer and connect to an Ethernet cable.
Hold down the Feed button and switch on the Printer. A receipt will print out showing the IP Address.
On a PC enter the IP Address you see on the Receipt. Enter admin for the Username and 123458 for the Password
Click on the option Net on the top
Select Disable for DHCP and enter the IP address you wish to use below
Press Save All Data

WiFi Setup

You will need:

Connecting your device to the 805W WiFi

Plug in and turn on the 805W
Open the wireless network browser on your device
- This is the browser you would use to connect to a WiFi network
Connect to the “Simple-WiFi” network in the WiFi network browser
- (Windows 7 WiFi network browser shown) There is no password to join the network.
- That can be changed later in advanced settings to prevent unwanted use of the printer.

Connecting to the 805W internal web server

Open a web browser (Internet Explorer shown here)
Go to URL: 192.168.2.1
- The default user name and password are listed below
- USER NAME: admin
  - The user name is all lower case
- PASSWORD: 1234567

Attaching the 805W to your WiFi network

Click the “Wireless Settings” link at the left of the screen
SSID: 1. Type in the name of your WiFi SSID
- 2. Your WiFI SSID may simply be something similar to” Linksys” or “Netgear”
- 3. Remember, the SSID is Case Sensitive
NetWork Mode: Make sure this setting is INFRA (STA)
Encryption: Usually this will simply be WPA-PSK(TKIP). This can vary depending on how the WiFi network was set up at your location
Key Format: 1. Change From HEX to ASCII
- 2. If you do not change this setting, you will get an error
- 3. See section “Setting up the printer’s IP address –Problems / Solutions”
Encryption key: Change this to the password that was set up for your WiFi network
Press the SUBMIT button
The screen may reload after pressing the submit button.
The submit key just saves your current settings

App Configuration