Miura M006

Specifications & Requirements

Specifications:

Dimensions: 2.68" x 3.82" x 0.71"

Weight: 4.16 oz

Warranty: 1 year

Battery Life: 3 hours continuous use

1. Pair the device to the Bluetooth of the phone/tablet.

Turn your device on. From the home screen of your phone/tablet, press your menu button.

Select Settings > Wireless & networks > Bluetooth Settings

On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range)
Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

Log into the app. Select Configure > Setup > Peripheral Devices.
Click Printer and select WOOSIM. Press Save.
A box will ask if you want to use this device as a swiper. Press No and then follow the below instructions.

3A. Configuring the Audio Jack swiper.

From the Peripheral Devices menu: Click Swiper and select Audio Jack. Press Save.

3B. Configuring the Miura EMV swiper.