BBPOS Chipper BT

Specifications & Requirements

Specifications:

Dimensions: 2.30" x 1.75" x 0.56"

Weight: 1.05 oz

Warranty: 3 months

Battery Life: 3 hours continuous use

SKU3: 080504012 Firmware Config Form Revision Number: 8 Firmware Version: 8.5.4 Config Version: 8

1. Pair the device to the Bluetooth of the phone/tablet.

Turn your device on. From the home screen of your phone/tablet, press your menu button.

Select Settings > Wireless & networks > Bluetooth Settings

Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range) The device will appeader as CHB followed by the device's serial number
Once devices are found, select the Chipper BT Reader and press Pair on the phone

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

Log into the app. Select Configure > Setup > Peripheral Devices.
Click Swiper and select Bluetooth. Then choose the option CHB(device's serial number).

3. Configuring the WOOSIM R241 Printer.

Turn your device on. From the home screen of your phone/tablet, press the icon for setup.

Choose Bluetooth from the left side menu.

On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
Make sure Bluetooth is turned on and wait a few seconds for your phone/tablet to detect all Bluetooth devices within range
Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

Log into the app. Select Configure > Setup > Peripheral Devices.
Click Swiper and select CA MPOS.
The application will run through some tests and then the Miura will restart. The device is now connected.

3. Configuring the WOOSIM R241 Printer.