Miura M007

Back to Peripherals

Specifications & Requirements

Specifications:

Dimensions: 5.90" x 3.15" x 0.91"

Weight: 6.35 oz

Warranty: 1 year

Battery Life: 3 hours continuous use

Manufacturer's Specifications

Configuration Guides

Quicksale for Android

1. Pair the device to the Bluetooth of the phone/tablet.

Turn your device on. From the home screen of your phone/tablet, press your menu button.

Select Settings > Wireless & networks > Bluetooth Settings

On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
Make sure Bluetooth is turned on and select Scan for Devices. (Wait a few seconds for your phone/tablet to detect all Bluetooth devices within range)
Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

Log into the app. Select Configure > Setup > Peripheral Devices.
Click Swiper and select Bluetooth. Then choose CA MPOS.

3. Configuring the WOOSIM R241 Printer.

From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

Quicksale for Apple iOS

Turn your device on. From the home screen of your phone/tablet, press the icon for setup.

Choose Bluetooth from the left side menu.

On the Miura make sure the Bluetooth Icon on the top left side of the screen is flashing. If not hold down the button with the Green Check mark until the icon begins flashing.
Make sure Bluetooth is turned on and wait a few seconds for your phone/tablet to detect all Bluetooth devices within range
Once devices are found, select CA MPOS. Confirm that the passkey displayed on the phone matches the one displayed on the Miura, if they match press the Check button on the Miura and then press Pair on the phone

2. Select the peripheral within CHARGE Anywhere Mobile Payment App.

Log into the app. Select Configure > Setup > Peripheral Devices.
Click Swiper and select CA MPOS.
The application will run through some tests and then the Miura will restart. The device is now connected.

3. Configuring the WOOSIM R241 Printer.

From the Peripheral Devices menu: Click Printer and select WOOSIM. Press Save.

Quicksale PC Windows

Connecting to a PC will require a Bluetooth Connection of 2.1 or higher. If your PC does not have Bluetooth internally a USB Bluetooth Dongle can be purchased to provide this functionality.
Turn your device on.
Connect the device to your PC using the supplied USB Cable. This will supply power to the Miura.
Pair the Miura in the PC's Bluetooth Settings

Demos & FAQ

Miura Pairing Guide - Click link to download a video guide to pairing the Miura Bluetooth EMV reader

Troubleshooting

The Bluetooth Icon will not start flashing after holding down the Green Check button

First make sure the device has not already been paired to another phone or tablet. If it is try unpairing the Miura from that device.
Press the reset button on the Miura device. The reset button can be found in the small pin hole on the left side. You may need a push pin or paperclip to press the button.
After pressing the reset button, choose option number 1 from the menu
Allow the Miura to reset and when it returns to the Charge Anywhere screen hold down the Green Check button again

Connect Unsuccessful in the Charge Anywhere App

Exit the Charge Anywhere application and go back into your Bluetooth settings. Toggle Bluetooth on and off and try connecting the Miura again in the Charge Anywhere application
Power off the phone or tablet and reset the Miura by pressing the small pin hole on the left side. Once both devices restart try connecting the Miura again in the Charge Anywhere application

Updating the Miura Software

If your device is not performing properly or a factory reset has been performed it will be necessary to update the software on the Miura. You can update the software by following the instructions here

System Tampered

The Miura is equipped with special sensors to prevent to device from being opened and the encryption keys stolen. If these sensors are triggered the Miura device will have it's memory wiped and will be inoperable. This can occur if the device is dropped causing the casing to crack or open. You may also get this message if there is a hardware level failure of the device. In either case the device will need to be replaced. You can contact your Merchant Service Provider or Charge Anywhere Technical Support for more information obtaining a replacement terminal.